MOTUL RBF 660 DOT 4 BRAKE FLUID 500ML

MOTUL RBF 660 Racing Factory Line DOT 4 100% Synthetic Brake Fluid may be used for all types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist to extreme temperature generated by racing carbon and ceramic brakes allowing to minimize air entrance for brake cooling. Can also be used with conventional steel rotors and clutch systems. Widely exceeds DOT 3, DOT4 and DOT 5.1 standards (except for DOT 5.1 viscosity at - 40°C).
\n
\nPERFORMANCE
\n
\nSTANDARDS : FMVSS 116 DOT 4 / SAE J1703 & J1704 / ISO 4925
\n
\nExtreme thermal resistance and stability:
\n
\nVery high boiling point (325°C / 617°F), superior to conventional DOT5.1 non silicone base / DOT5 silicone base fluids (260°C / 500°F mini) and DOT4 (230°C / 446°F mini)
\n
\nEnables effective brake even in extreme conditions.
\n
\nBetter aerodynamic performance by reducing air entrance for brake cooling for cars.
\n
\nEfficient when rainy:
\n
\nVery high wet boiling point (204°C / 400°F) superior to conventional DOT 5.1 non-silicone base fluid (180°C / 356°F mini) and DOT 4 (155°C / 311°F mini enables to keep efficient braking while rainy. Brake fluids tend to absorb humidity from the air, which reduce boiling point and increase the risk to get vapour lock phenomena. The wet boiling point is measured by humidifying the product with about 3.5 % of water.
\n
\nRECOMMENDATIONS
\n
\nAvoid mixing with polyglycols based brake fluid.
\n
\nDo not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM).
\n
\nStore brake fluid in its original container, tightly closed to prevent moisture absorption.
\n
\nAggressive chemical product if contact with hands, paint or varnish. If skin contact, rinse thoroughly with water.
\n
\nPROPERTIES
\n
\n100% synthetic fluid, polyglycol bases.
\n
\nColour Amber
\n
\nDry boiling point 325°C / 617°F
\n
\nWet boiling point 204°C / 400°F
\n
\nViscosity at -40°C (-40°F) 1698 mm°/s
\n
\nViscosity at 100°C (212°F) 2.59 mm°/s